What Hydroseal 75?
Description. Hydro-Seal 75 is a high strength, hydrophobic, breathing type, two-component, modified epoxy coating manufactured from a balanced ratio of fillers, and water extended resins and hardeners. Our exclusive formula combines flexibility with the hardness of epoxy resins.
What is Hydroseal concrete?
HydraSeal is a concrete sealant formulated for solving moisture migration. Typical Uses for HydraSeal when you have porous concrete, a broom finished floor, soft chalking concrete or serious existing water migration problems. Good for interior or exterior conditions.
Will epoxy seal basement walls?
Epoxy Waterproofer – Makes concrete waterproof A leaking basement wall or floor is an easy fix. Use to stop interior foundation leaks and to seal precast concrete tanks or stone foundations that often have leaking joints.
Is epoxy concrete waterproof?
Yes, epoxy flooring provides a shield against water, and the subsequent degradation it can cause. More than that, however, Prestige Floor Coating products offer a barrier against spills of all kinds, including abrasive and caustic chemicals.
What is the best product for sealing basement walls?
When sealing basement floors and foundation walls the best concrete sealers to use are the Lithi-Tek 4500 primer followed by the Siloxa-Tek 8510 waterproofing sealer. If you are going to be installing flooring in the basement, it is best to use a moisture vapor barrier coating like the Vapor-Tek 440.
Will epoxy waterproof a basement?
Epoxy is virtually waterproof, which means it can protect the floor beneath it from moisture. If your basement is damp, it can be very important to protect each part of the structure from moisture, as mold and mildew can begin to thrive in this kind of environment.
Does epoxy seal out water?
Is Epoxy Resin Waterproof? One of the many great properties of epoxy resin – aside from the adhesion and filling attributes – is its ability to seal and form a waterproof (and anti-corrosive) layer of protection.
What is the purpose of epoxy cement?
Epoxy is an adhesive used for bonding concrete. Epoxy resins are used with concrete in the form of coatings, repair materials, grouts, bonding agents, paints, adhesives, epoxy mortars, sealers, penetrating sealers, wearing surfaces, and as admixtures to hydraulic cement concrete to make epoxy polymer-modified concrete.
Should you seal basement concrete?
Whether you plan on finishing your basement space or keeping it in its original state, it is important to apply a waterproof sealant to the concrete floor in order to lock out moisture. An epoxy-coated basement floor is one of the best ways to maintain and preserve your space.
Does epoxy seal concrete floors?
Concrete floor sealer (Technically an epoxy or urethane coater can be considered a type of sealer, but these also add a number of other properties to the floor and so will be considered separately.)
How long until epoxy is waterproof?
In general, a suitable time will be 7 days at 75° If you fail to comply with this curing time, you will find that you have solvent entrapment (the solvents are trapped within the coating film). In some cases, some products claim you can apply the Epoxy when the item is still wet.
What is hydro seal 75?
Full content visible, double tap to read brief content. HYDRO-SEAL 75 resists peeling, blistering or flaking due to moisture, & because Hydro-Seal 75 is an epoxy resin formula, it has excellent freeze/thaw durability, superior adhesion, & high chemical resistance. HYDRO-SEAL 75 blocks out the elements yet allows concrete surfaces to breath.
How do you use hydro epoxy sealer?
For patching cracks, snap tie holes and the floor/wall seam an application of Hydro-Epoxy Mortar (Hydro-Seal 75 mixed with Portland Cement & Sand) applied with a wide putty knife, trowel, or taping knife works best provided there is no running water during application.
How long does it take to apply hydro seal 75?
Don’t mix more than 1 gallon at one time. Pot life is 30 – 40 minutes. 3.) Application – Apply Hydro-Seal 75 with 3/8” nap rollers, brushes or spray gun as you would normal paint. Make sure each batch is applied in the 30 to 40 minute pot life.
Can hydro-seal 75 be used on wet surfaces?
Hydro-Seal 75 can be applied to a damp surface, not a wet surface. A wet surface, or actively leaking surface will thin material not allowing proper curing. Proper preparation includes washing the surface with Tri Sodium Phosphate (TSP) prior to application of Hydro-Seal 75.