What size is a W24x55?
ASTM Steel Wide Channel H Beam Section Properties various sizes ranging W14 – W25
| in × lb/ft | Area (in2) | d (in) |
|---|---|---|
| W24x55 | 16.2 | 23.57 |
| W21x147 | 43.2 | 22.06 |
| W21x132 | 38.8 | 21.83 |
| W21x122 | 35.9 | 21.68 |
What size is a W8x18 beam?
Wide Flange Beam Specifications Chart
| SIZE | LBS/FT | DEPTH |
|---|---|---|
| W8x10 | 10 | 7.89 |
| W8x13 | 13 | 7.99 |
| W8x15 | 15 | 8.11 |
| W8x18 | 18 | 8.14 |
What does W8x18 mean?
Wide Flange Beam Specifications Chart
| SIZE | LBS/FT | DEPTH |
|---|---|---|
| W8x13 | 13 | 7.99 |
| W8x15 | 15 | 8.11 |
| W8x18 | 18 | 8.14 |
| W8x21 | 21 | 8.28 |
How wide is a W8x18 beam?
Structural A36 Steel Wide Flange I Beam Section Properties Table
| in × lb/ft | Area (in2) | d (in) |
|---|---|---|
| W8x24 | 7.08 | 7.93 |
| W8x21 | 6.16 | 8.28 |
| W8x18 | 5.26 | 8.14 |
| W8x15 | 4.44 | 8.11 |
What does the W stand for in steel beams?
W-beams. The W in its name refers to “wide flanges.” The main difference between W beams is that the inner and outer flange surfaces are parallel. Furthermore, the overall beam must have a depth that is at least equal to the flange width. Usually, its depth is significantly greater than its width.
How wide is a W16 steel beam?
Wide Flange Beams – Misc Shapes
| Size & Weight Per Foot | B Flange Width Inches |
|---|---|
| W16 x 31 | 5.525 |
| W16 x 36 | 6.985 |
| W16 x 40 | 6.995 |
| W16 x 45 | 7.035 |
How do you size a wide flange beam?
Wide flange beams are designated by the letter W followed by the nminal depth in inches and the weight in pounds per foot. Thus W12 × 19 designates a wide flange beam with a depth of 12 inches and a nominal weight of 19 pounds per foot.
What is stronger I-beam or W beam?
I-beams have a much more narrow flange in comparison to their web. Key characteristics of wide flange beams include: They are much heavier than I-beams, meaning they can typically take more force. They have a thicker center web, often increasing their strength.
What is an American wide flange beam?
Beams – Fixed at Both Ends – Continuous and Point Loads. The standard method for specifying the dimensions of a American Wide Flange Beam is for example W 6 x 25, which is 6 inches deep with a weight of 25 lb/ft. I-shaped cross-section beams:
What are the dimensions of a 13 wide flange beams ASTM?
4 5⁄8 1⁄4 3⁄4 XX Max. Flge. Fas- ten- er CHATHAMSTEELCORPORATION 13 WIDE FLANGE BEAMS ASTM A36 & A992 WSHAPES Dimensions
What does W12×19 mean on a beam?
Wide flange beams are designated by the letter W followed by the nominal depth in inches and the weight in pounds per foot. Thus W12 × 19 designates a wide flange beam with a depth of 12 inches and a nominal weight of 19 pounds per foot. Oberg, E. , Jones ,F.D. , Horton H.L. , Ryffel H.H., (2016) .
What is the weight of the chathamsteelcorporation wide flange beams?
80.6455⁄8 5⁄1 6 14.725 143⁄4 1.030 1 10 25⁄1 6 19⁄1 6 8 CHATHAMSTEELCORPORATION WIDE FLANGE BEAMS