What sizes does timber come in?
Standard Timber Lengths Softwood comes in standard lengths of 1.80m 2.10m 2.40m 2.70m 3.0m 3.30m 3.60m 3.90m 4.20m 4.50m 4.80m 5.10m 5.40m 5.70m 6.0m and 6.30m.
What sizes does pine come in?
Standard timber lengths are 2.4, 3.0, 3.6, 4.2, 4.8, 5.4 & 6.0m.
What are standard timber lengths in NZ?
Common Timber Sizes The standard sizes produced by New Zealand sawmills are; Width: 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275 and 300mm. Thickness: 25, 40, 50, 75 and 100mm. Length: 1.8 to 6.0m in increments of 0.3m.
What does F5 mean in timber?
Structural Timber F5 & F7 H3 protects against moderate decay, borers and termites and can be used for cladding, fascia, pergolas, decking, carports, balustrade, fencing, beams, joists, and bearers.
What are the different sizes of wood?
Common Dimensional Lumber Sizes
| Dimensional Lumber: Nominal Size vs. Actual Size | |
|---|---|
| Two-by-four or 2 x 4 | 1 1/2 inches x 3 1/2 inches |
| Two-by-six or 2 x 6 | 1 1/2 inches x 5 1/2 inches |
| Two-by-eight or 2 x 8 | 1 1/2 inches x 7 1/4 inches |
| Two-by-ten or 2 x 10 | 1 1/2 inches x 9 1/4 inches |
What lengths are timber sold in?
Length. Timber is sold in various lengths that are multiples of 30cm (apx a foot). Most common are 1.8m, 2.4m & 3m (apx 6′, 8′ & 10′). Several longer sizes are also sold.
What lengths do 4×2 come in?
4×2 Timber lengths 100mm x 47mm x 2.4 metres. 100mm x 47mm x 3.0 metres. 100mm x 47mm x 3.6 metres. 100mm x 47mm x 4.2 meters.
What does MGP12 mean?
Machine Graded Pine
| MGP10 = F7 | MGP12 = F8 | MGP15 = F11 |
|---|---|---|
| Highly versatile all-round timber Minimum requirement for building | Higher strength than MGP10 Suitable for frames, walls, floors joists and supports | Higher strength than MGP12 Suitable for frames, walls, floor joists and supports |
What does F7 timber mean?
In terms of product performance, both MGP10 and F7 grades meet Australian standards. Stiffness and strength are the two main properties to consider when deciding which grade is better suited to a project. MGP10 has a higher stiffness grade while F7 has a slightly higher strength grade.
What size does hardwood come in?
These days, the standard width in hardwood flooring is the 4- or 5-inch wide plank. Curious minds may know that the standard has grown wider with time. These widths are often the go-to because the boards can fit nicely and effectively in most rooms.